This weeks lab was all about putting in a DVD player. The DVD I got was PATA and I set it as the master so my 2nd hard drive would be the slave.
You need to make sure you have on your ESD bracelet.
To install a DVD you need to take both sides of the PC case off. Then you slip the DvD drive into the bay, line up the4 screw holes and screw it in place. Next you hook up the data cable; in my case I used a 80 wire 40 pin stream line ribbon cable. Once this is done you plug in the power connector and bam your done with this Super hard task..lol! Now put the sides back on and your done.
The empty bay.
The cables all hooked up
That's one hot DVD in place
No comments:
Post a Comment