Saturday, November 27, 2010

Chapter 15 Project 15-3,15-4,15-7.

Project 15-3
1. Execute the Startup Repair Process. What were the results?
As you can see from the photo below Startup repair did not find any problem so it didn't do anything.



2.Execute System Restore. What is the most recent restore point?
The most recent restore point was from when I installed open office. *Note: The date was off by a month on my PC. True date was Dec 1 ,2010. See image below.


3. Using the command prompt window, open the Registry Editor. What command did you use?
As you can see from the photo below I used regedit command to open the registry.




4. Using the command prompt window, copy a file from your Documents folder to a flash drive.
Were you able to copy the file successfully? If not, what error message(s) did you receive?
I was not able to get the files to copy over, below is a copy of the message I got.






Project 15-4
I was unable to find any differences between Safe & normal modes. This could be because I was working with a freshly installed windows.



Project 15-7
As you can see from my image in 15-4 I didn't have and difference between safe mode & normal mode. Bob, one of the other students in the call said he didn't see any difference as well other the drivers for his Anti-virus program. Since I didn't have one installed I didn't have any difference.

Chapter 14 Project 14-1, 14-2, 14-3,14-5,14-6

Project 14-1





Project 14-2



Project 14-3

Project 14-5

Project 14-6

Chapter 13 Projects 13-1,13-2,13-4, And other stuff



13-1 Using system Restore.
1.Done, 2. I changed the display, 3. I changed the back ground, 4. I used system restore.
Are the changes still in effect? No. This is because system has restored the system to what it looked like before I made the changes.
13-2 The only thing a non-admin can do in disk Cleanup in the Recycle Bin. This limitation is in place to prevent non-admin's from removing files they do not need to.

Clean up the drive (pg 608.) Using Disk Clean up.
Hmm I just did this in Project 31-2. I used this to remove Downloaded program Files, Temporary Internet Files, Recycle Bin & the Temporary files. Basically all the junk on the hard drive.

De-fragment the Hard Drive (pg.609)
De fragmenting the hard drive is like resorting a file cabinet back in alphabetical order. It puts related files and folders next to each other so the hard drive can access them faster. First you analyze the drive, then DE-fragment it if it is needed.



Disk check (pg. 612)
Disk check basically just check to make sure your hard drive is work. Most of the time you will have to do a disk check of you hard drive before you can defrag the system. To check your disk you goto to properties window then the tools tab and hit the check Now button. This will bring up another window where you need to select a few options, Auto fix & recovery of Bad sectors. You can also use the "chdisk C:/r" command in the command window.
Verify Start-up programs (pg.613)
Often after a computer has been up and running for a while to performance will start to slow down. This could be do to that fact that almost every program we install into our PC these days installs a part of its program to start when the PC starts. To check and edit this you need to goto the System Configuration Utility Start up tab. Here is a list of ALL the programs that start up with your PC. To get this to open just type msconfig in the run box under start fro you desktop bar. This tool is one of the most handy tools. But if you do decide to turn some of these off, just do a few at a time to make sure you don't turn off anything you need. You can also google the program on the list to see what they really are.

Managing hard drive volumes making a new volume. (pg.655)
Windows Vista and later allows you to make new hard drive partitions and resizing one. Windows XP and earlier was unable to do this unless you used a third party software like Partition Magic. You can do this neat stuff from the Disk Management. (start, right-click Computer, select Manage, then click Disk Management.)

Backing up user data (pg. 629 & 637)
You can back up user data one of two ways with windows 7 System restore or Complete PC backup. We went over system restore in PJ 13-1. So I decided to use Complete PC backup, since I have this new drive volume from the lab before. Got Control Panel, under System and Maintenance, click BACK up your computer Then just follow the wizard.

Saturday, October 30, 2010

Chapter 12 Installing Windows 7






Installing windows was a simple. All I had to do is put in the DVD and follow the step by step instructions. I did have a few bumps. The DVD the class had were copy's and as such did not always work right. The first disk I used wouldn't install. The 2nd disk I used took a really long time to install and as such I was left with a few doughs about my hardware. So I ended up wasting time reconfiguring some of it, before I gave the DVD proper amount of time to work.

Monday, September 27, 2010

Chapter 9 Project 9-1


This weeks lab was all about putting in a DVD player. The DVD I got was PATA and I set it as the master so my 2nd hard drive would be the slave.
You need to make sure you have on your ESD bracelet.
To install a DVD you need to take both sides of the PC case off. Then you slip the DvD drive into the bay, line up the4 screw holes and screw it in place. Next you hook up the data cable; in my case I used a 80 wire 40 pin stream line ribbon cable. Once this is done you plug in the power connector and bam your done with this Super hard task..lol! Now put the sides back on and your done.
The empty bay.

The cables all hooked up

That's one hot DVD in place

Wednesday, September 22, 2010

Chapter 8 Project 8-6



Project 8-6


Practice installing a hard drive

This week’s lab I installed an ATX 500w power supply & two hard drives, one SATA (Serial), one PATA (Parallel), into our class room PC builds. The power supply goes to the back of the PC tower and is held in place by 4 screws. The hard drives are installed towards the front of the PC tower and are also held in place with 4 screws. The SATA & PATA both require different power hook ups and data hook ups. Even though there are adapters to hook up PATA to SATA connections and vice versa it is best to get a motherboard & power supply that supports the drive(s) you would like to have. My motherboard & power supply supports both. After the Hard drives and power supply were installed into the tower all I had to do is hook up the proper data cables between the hard drives and the motherboard, plug in the power supplies to the motherboard and hard drives & case fans. *Note I had to install the 2nd hard drive as a slave (since the DVD will be the master) to do this all I had to do is remove to jumper on the back of the drive. The SATA only has one drive per cable so setting jumps is not need for this type of drive.

Here are a few photos of these installs.

The hole where the Power supply sits



The power supply in place.



The SATA Hard Drive



The Hard Drives all hooked up and powered.


24 pin ATX power hooked up to the Motherboard.